From project planning to commissioning

We realize your projects from planning to commissioning - completely from a single source. This allows us to react to change requests in the short term. Throughout the project, a personal contact person is available at ING Micro. Your tasks can be implemented on-site on Siemens NX.

From project planning to commissioning

We realize your projects from planning to commissioning - completely from a single source. This allows us to react to change requests in the short term. Throughout the project, a personal contact person is available at ING Micro. Your tasks can be implemented on-site on Siemens NX.


DESIGN & DEVELOPMENT

Development and NX design services for small and medium-sized enterprises

TRAINING & EDUCATION

Expand design know-how, increase career chances

OUR CREATIVE IMPULSES

Customized solutions tailored to your needs

SPECIALIZATION

Areas of vehicle technology - vehicle electrics, exhaust systems, thermal management

We are working with Siemens NX. Consistent and accurate documentation ensures the later adaptation of the designs we have created to new circumstances and increases the useful life of your investment. In addition, we compare performance and cost of possible suppliers for manufacturing. Depending on your requirements, we can realize the complete processing of your projects or assume the implementation of required sub-areas. The starting point for this is the transfer of your CAD data.

DESIGN & DEVELOPMENT

Development and design services for small and medium-sized enterprises

We specialize in:

  • NX design and development for mechanical engineering, automotive engineering, plant construction and electrical engineering as well as CAD documentation, for example, due to bottlenecks in your internal design department
  • Support for development projects in automotive engineering, mechanical engineering, tool engineering and plant engineering
  • Support the entire design process, starting with the design of concepts, the designing of individual components up to the complex assembly
  • Production documentation in the form of parts lists and production drawing production

The close, partnership-based cooperation with our customers and regular arrangements in the individual phases guarantee a successful implementation!

We are working with Siemens NX. Consistent and accurate documentation ensures the later adaptation of the designs we have created to new circumstances and increases the useful life of your investment. In addition, we compare performance and cost of possible suppliers for manufacturing. Depending on your requirements, we can realize the complete processing of your projects or assume the implementation of required sub-areas. The starting point for this is the transfer of your CAD data.

DESIGN & DEVELOPMENT

Development and design services for small and medium-sized enterprises

We specialize in:

  • NX design and development for mechanical engineering, automotive engineering, plant construction and electrical engineering as well as CAD documentation, for example, due to bottlenecks in your internal design department
  • Support for development projects in automotive engineering, mechanical engineering, tool engineering and plant engineering
  • Support the entire design process, starting with the design of concepts, the designing of individual components up to the complex assembly
  • Production documentation in the form of parts lists and production drawing production

The close, partnership-based cooperation with our customers and regular arrangements in the individual phases guarantee a successful implementation!


Are you ready?
Contact Us.

Contact Us


Are you ready?
Contact Us.

Contact Us

The requirements for innovative, trend-setting products are constantly increasing. Just as the expectations of people, the technology of tomorrow develop or produce. Due to our proximity to market and customer, due to the diversity of our fields of application, we know the qualifications of the engineer or technician. And we know how this can be achieved. Through the combination of experience and renewal.

We use continuous contact with companies and contact persons, current position descriptions and engineering market studies to determine the requirements for qualified personnel and to derive further training requirements. From this, we develop training measures that are specifically tailored to the needs of our customers and thus provide the greatest possible relevance to the workplace.

We train in target-group-oriented training units depending on the knowledge and the varied mix of theory and practical exercises, because practical reference is our top priority. These are the best prerequisites for optimal know-how transfer and sustainable learning success.

TRAINING & EDUCATION

Expand design know-how, increase career chances

On request, the customer determines the contents of the course! We will contact you in advance and discuss the content and objectives of the training. Flexibility during the seminar guarantees the customer a highly efficient course with optimal results. Courses in the familiar IT environment at the customer site combined with exercise examples promise maximum results among the students. After the seminar, the learned can be implemented in a very short time. The priorities are to clarify understanding questions, to show basic principles and to provide tips on strategy. Each mediation of basic knowledge is followed by practice examples of different difficulty levels from different sectors. The focus is on the independent application of knowledge to the provided or self-imposed tasks ("learning by doing"). After completion of the course, the participants will be able to master the trained CAD system to an extent that allows an immediate introduction into the company's practice. The contents described below are only a suggestion. Your requirements will be discussed with you before the course. On request, the customer can determine the contents!

Basics

  • System foundations and user interface
  • Definitions
  • Manipulation with the compass
  • Importance and use of the structure tree
  • Geometrical set and reference elements
  • Use of formula and parameters

Sketcher

  • Creation of plane sketches (profiles)
  • Different approaches
  • Use conditions
  • Review and modify the sketches

Component Design (Part Design)

  • Components produce from sketches
  • Components from surfaces
  • Use of reference elements
  • Preparation (chamfers, bevels, etc.)
  • Use conditions
  • Boolean operations
  • measurements
  • Modify the components

Assembly Design

  • Assembling assemblies from components
  • Use of conditions
  • Move the components
  • Operations on several components of an assembly
  • Attaching welding symbols and texts
  • Using manipulation windows (scenes)
  • Check and modify the assembly

Drawing (Drafting)

  • Drawing derivation from 3D (Generative Drafting)
  • Manual creation and preparation of drawing geometry (Interactive Drafting)
  • Generating views, cuts, etc.
  • Creation of dimensions as well as shape and position tolerances
  • Attaching text, welding and surface symbols
  • Expand the drawing to multiple sheets
  • Position numbers and parts list
  • Use different standards and settings
  • Review and modify the drawing

Surface construction (Wireframe & Surface Design)

  • Basic differences between volume bodies and surfaces
  • Create and modify wire model elements (points, lines, planes) (extended)
  • Create curves (spline, helix, connection curve, etc.)
  • Surfaces are produced by extrusion, rotation, translation etc. of curves
  • Connect and repair surfaces
  • Transformations (mirroring, etc.)
  • Produce surfaces from volume bodies and reversed

The topics can be summarized as required. Duration and content can be varied according to the participants previous knowledge and requirements. The course participants will receive extensive training documents, which will be used during the course. These are designed in such a way that they can be used as a reference work in the daily work.

The requirements for innovative, trend-setting products are constantly increasing. Just as the expectations of people, the technology of tomorrow develop or produce. Due to our proximity to market and customer, due to the diversity of our fields of application, we know the qualifications of the engineer or technician. And we know how this can be achieved. Through the combination of experience and renewal.

We use continuous contact with companies and contact persons, current position descriptions and engineering market studies to determine the requirements for qualified personnel and to derive further training requirements. From this, we develop training measures that are specifically tailored to the needs of our customers and thus provide the greatest possible relevance to the workplace.

We train in target-group-oriented training units depending on the knowledge and the varied mix of theory and practical exercises, because practical reference is our top priority. These are the best prerequisites for optimal know-how transfer and sustainable learning success.

TRAINING & EDUCATION

Expand design know-how, increase career chances

On request, the customer determines the contents of the course! We will contact you in advance and discuss the content and objectives of the training. Flexibility during the seminar guarantees the customer a highly efficient course with optimal results. Courses in the familiar IT environment at the customer site combined with exercise examples promise maximum results among the students. After the seminar, the learned can be implemented in a very short time. The priorities are to clarify understanding questions, to show basic principles and to provide tips on strategy. Each mediation of basic knowledge is followed by practice examples of different difficulty levels from different sectors. The focus is on the independent application of knowledge to the provided or self-imposed tasks ("learning by doing"). After completion of the course, the participants will be able to master the trained CAD system to an extent that allows an immediate introduction into the company's practice. The contents described below are only a suggestion. Your requirements will be discussed with you before the course. On request, the customer can determine the contents!

Basics

  • System foundations and user interface
  • Definitions
  • Manipulation with the compass
  • Importance and use of the structure tree
  • Geometrical set and reference elements
  • Use of formula and parameters

Sketcher

  • Creation of plane sketches (profiles)
  • Different approaches
  • Use conditions
  • Review and modify the sketches

Component Design (Part Design)

  • Components produce from sketches
  • Components from surfaces
  • Use of reference elements
  • Preparation (chamfers, bevels, etc.)
  • Use conditions
  • Boolean operations
  • measurements
  • Modify the components

Assembly Design

  • Assembling assemblies from components
  • Use of conditions
  • Move the components
  • Operations on several components of an assembly
  • Attaching welding symbols and texts
  • Using manipulation windows (scenes)
  • Check and modify the assembly

Drawing (Drafting)

  • Drawing derivation from 3D (Generative Drafting)
  • Manual creation and preparation of drawing geometry (Interactive Drafting)
  • Generating views, cuts, etc.
  • Creation of dimensions as well as shape and position tolerances
  • Attaching text, welding and surface symbols
  • Expand the drawing to multiple sheets
  • Position numbers and parts list
  • Use different standards and settings
  • Review and modify the drawing

Surface construction (Wireframe & Surface Design)

  • Basic differences between volume bodies and surfaces
  • Create and modify wire model elements (points, lines, planes) (extended)
  • Create curves (spline, helix, connection curve, etc.)
  • Surfaces are produced by extrusion, rotation, translation etc. of curves
  • Connect and repair surfaces
  • Transformations (mirroring, etc.)
  • Produce surfaces from volume bodies and reversed

The topics can be summarized as required. Duration and content can be varied according to the participants previous knowledge and requirements. The course participants will receive extensive training documents, which will be used during the course. These are designed in such a way that they can be used as a reference work in the daily work.


Are you ready?
Contact Us.

Contact Us


Are you ready?
Contact Us.

Contact Us

From project planning to commissioning

We realize your projects from planning to commissioning - completely from a single source. This allows us to react to change requests in the short term. Throughout the project, a personal contact person is available at ING Micro. Your tasks can be implemented on-site on Siemens NX.